Page 379 - ProShow Producer Manual

379

Pan

The Pan value controls the actual placement of your layer within the slide.
When a layer moves from one place to another, it’s panning.

The Pan setting is divided into two values: X and Y. The X value is on the left
and the Y value is on the right. These two values are just the same as you
may have worked with when doing graphing.

The X axis is the horizontal axis. The pan values on this axis move the layer
to the left or right. The Y axis is the vertical axis. The Pan values here will
move the layer up or down. Knowing the values you can use within the
slide frame can help you decide what you want to use for your Pan values.
Remember that you can also drag your layer around the Preview window,
as you learned in the Layers chapter, to change its position.

Every slide is an invisible grid. It has a total range of 100, with the middle
point of the slide being 0 on both the X and Y axes. The full range on the X
axis is from -50 on the far left side of the slide, to 50 on the far right. That
gives you a total range of 100.